Enews signup

Lower Emissions

Not sure which solution fits your needs? Contact Your Rep

Overview

Cleaver-Brooks works with customers to tailor solutions that help them decrease emission levels to both be more environmentally friendly and meet ever stringent guidelines. In some cases, that means replacing the boiler system. In other cases, Cleaver-Brooks can retrofit products to help a company meet its emission goals.

Explore our product selector by using the tabs to view the options appropriate for your needs.

New Boiler

Whether you choose a Firetube or Watertube, large or small capacity, all Cleaver-Brooks boilers are designed to be as efficient as possible and provide the lowest emissions.

CBEX Elite CBND Series Electrode Boiler ClearFire®-LC
View Full Product
Details
View Full Product
Details
View Full Product
Details
View Full Product
Details
CBEX Elite

Highest Efficiency

  • Steam and hot water
  • 100 to 1,200 HP
  • Natural gas, #2 light oil or combination
  • 50 to 250+ psig on steam, 30 to 125 psig on hot water
  • Available to <5 ppm NOx
CBND

Steam-ready

  • Saturated steam
  • 10,000 to 225,000 lb/hr
  • Natural gas, #2 oil
  • Design pressure up to 1,500 psig
  • Available to less than 7 ppm NOx, Ultra-Low CO
Electrode

Model: CEJS

  • High-voltage steam boiler
  • 4.16-25  kV – up to 188,000 lb/hr
  • 100-500 psi
  • No local emissions
  • Fast response time
ClearFire-LC

Large Capacity, Fully Condensing

  • Full condensing hydronic boiler
  • 4,000 to 12,000 MBTU
  • Ultra-low emissions
  • Up to 98% efficiency
  • Offers 5:1 turndown

Upgrade Your Burner

Every Cleaver-Brooks burner is designed and built to increase your boiler’s efficiency and decrease emissions.

ProFire®-XL Series ProFire®-D Series ProFire®-MTH Series NATCOM Retrofit Burner
View Full Product
Details
View Full Product
Details
View Full Product
Details
View Full Product
Details
ProFire-XL

Large, Forced Draft Burner

  • 37.8 to 92.4 MMBTU input range
  • 900 to 2,200 HP
  • Gas, oil, combination
  • Available to <9 ppm NOx
ProFire-D

Forced Draft Burner

  • 3.4 to 42.0 MMBTU input range
  • 80 to 1,000 HP
  • Gas and #2-#6 oil, combination, alt. fuels
  • Available to < 9 ppm NOx
MTH

Forced Draft Burner

  • 2.5 to 16.0 MMBTU
  • 60 to 380 HP
  • Natural gas or propane 
  • Low NOx achieved without FGR
NATCOM Retrofit Burner

Retrofit Systems

  • Steam and hot water applications
  • 20 to 400 MMBTU
  • Natural gas, #2 and #6 oil, combination, other
  • Available to <9 ppm NOx, <50 ppm CO
  • Saves fuel and lowers emissions

Controls

Ensure your system runs at peak efficiency with our integrated boiler room controls. Regardless of your boiler system, there's a control that will complement it.

Hawk 1000 Hawk 4000
View Full Product
Details
View Full Product
Details
Hawk 1000

Integrated Boiler Room Control

  • Saves fuel
  • Keeps your boiler operating at peak performance
  • 4” color touch screen
  • Intuitive interface
  • New or retrofit boiler applications
  • Ideal for commercial or light industrial applications
  • uL listed
Hawk 4000

Advanced Boiler Room Control

  • Saves fuel
  • Optional oxygen trim and variable-speed drive
  • Control economizers and other equipment
  • 7” color touch-screen interface, PLC-based
  • Custom programming available
  • uL Listed

Heat Recovery

Allow your boiler to run more efficiently and reduce fuel usage with economizers and heat exchangers.

CCE Economizer C2X Economizer Flash Tank Heat Recovery Blowdown Heat Recovery
View Full Product
Details
View Full Product
Details
View Full Product
Details
View Full Product
Details
CCE

Cylindrical Design

  • Steam and hot water applications
  • Saves fuel by preheating feedwater
  • Boilers up to 250 HP
  • Accommodates all boiler design pressures
  • Accommodates heavy oil fuel
Condensing Economizer

Condensing Economizer

  • Steam applications
  • Captures more energy than a stack economizer
  • Ideal for larger boilers
  • Boilers up to 2,200 HP
  • Accommodates all boiler design pressures
Flash Tank

Model AHR

  • For steam applications
  • Captures waste heat from blowdown process
  • Preheats cold makeup water
  • Up to 22 gpm blowdown
  • Up to 180 gpm makeup
Blowdown Heat Recovery

Capture Waste Heat

  • For steam applications
  • Captures waste heat from blowdown process
  • Maintains desired level of total dissolved solids (TDS)
  • Up to 22 gpm blowdown
  • Up to 180 gpm makeup

Water Systems

Increase the safety, reliability and life of your boiler with water treatment and feed and recovery options.

Surge Tank Boiler Feed System Water Softeners
View Full Product
Details
View Full Product
Details
View Full Product
Details
View Full Product
Details

Surge Tank

Model SRG

  • 300-3,600 Gals.
  • Steam and Hot Water applications
BoilerFeedSystem

Model BFS

  • Atmospheric pressure
  • Steam and Hot Water applications
  • Up to 1,000 gallons
SMR

Models: SMR & FMR, FSE & SSE, CRS

  • Steam and hot water applications
  • Sized from 20,000 to 1,500,000 grains exchange capacity
  • Flow rates from 2 to 450 gpm
  • Tanks of FRP plastic or steel
  • Compatible with all boiler applications

Parts & Service

Turnkey conversions and comprehensive upgrade and retrofit capabilities from our world-class engineering staff make it easy to lower emissions or bring any age system back to the manufacturer’s original specifications. Whatever advantage or benefit you may need, Cleaver-Brooks has the solution and dedicated aftermarket team to help you engineer and implement it.

 Our proprietary BOOSTSM report can determine the exact upgrades and accessories your existing boiler system needs to increase its efficiency to its absolute maximum and decrease emissions. By installing the right burners, controls and heat recovery equipment, you can realize substantial savings immediately, and savings of hundreds of thousands of dollars over the life of the boiler. And our financial report details the cost savings in real numbers, so you can prove it’s the right thing to do.

Complete our information request form with your system’s details and a member of our Parts and Service team will help you develop a custom solution, or contact your local rep today to start developing a program that’s right for you.